![](<https://docs.versio.io/img/importer/network-scan/network-scan.svg>)

# Network scan importer

Versio.io can scan networks to help you verify the completeness of the detected IP-based devices, such as hosts, routers, switches, network printers, etc. The network scanner identifies devices using various methods:

- Reading the ARP table
- Pinging the IP address
- Reverse DNS lookup (NsLookup)
- Establishing a connection to a port
- Establishing a connection via SNMP

> [!WARNING]
>
> **Attention**
>
> Unlike other Versio.io importers, the detected devices are not saved as Versio.io instances!

The results are available in the *Discovery &amp; Insights* dashboard (`Environment settings` -\> `OneImporter & OneGate` -\> `Discovery & insights` tab). The results indicate whether the device already exists as an instance in Versio.io or is unknown. To help you navigate, we display additional details for unknown devices, such as network names or manufacturers.

## Prerequisites

The network scanner can be run on Linux and Windows hosts. The `arp` command is required on the executing host for the network scan.

## Configuration

The following configuration options are available:

### Profile

You can choose between three different profiles. The more network requests the scanner sends, the faster it completes the scan. Be aware that too many network requests could slow down your network!

| Profile | Network traffic | Estimated duration |
| --- | --- | --- |
| **Fast** | \~50 IPs per minute | \~5 minutes for a /24 subnet |
| **Medium** | \~20 IPs per minute | \~15 minutes for a /24 subnet |
| **Slow** | \~2 IPs per minute | \~2 hours for a /24 subnet |

### Auto detect networks

With this option enabled, the executing OneGate will scan every connected IPv4 network. To avoid scanning large virtual networks, auto-detection skips network interfaces with a randomized MAC (such as Docker networks). If your OneGate uses a randomized MAC in the network you want to scan, you might have to add it to the `networks` configuration below.

### Networks

Enter networks which should be scanned in addition to the auto-detected networks. Enter the network IP address followed by the network mask (CIDR notation, e.g. `192.168.0.0/24`). Make sure at least one executing OneGate has access to the network, otherwise it cannot be scanned!

### Ports

Specify which ports should be scanned. By default, the following ports are included:

- **21** - FTP
- **22** - SSH
- **23** - Telnet
- **25** - SMTP
- **53** - DNS
- **80** - HTTP
- **115** - SFTP
- **135** - RPC
- **139** - NetBIOS
- **161** - SNMP
- **162** - SNMP
- **443** - HTTPS
- **445** - SMB
- **515** - LPD
- **548** - AFP
- **631** - IPP
- **1433** - MS SQL
- **2049** - NFS
- **3306** - MySQL
- **3389** - Remote Desktop Protocol (RDP)
- **5000** - Synology
- **5001** - Synology
- **5353** - mDNS
- **5432** - PostgreSQL
- **5900** - VNC
- **5985** - WinRM HTTP
- **5986** - WinRM HTTPS
- **8006** - Proxmox
- **8080** - HTTP
- **8291** - MikroTik WinBox
- **9100** - JetDirect
- **43003** - NRTM
- **51820** - WireGuard
